From Breece Cloud, it is possible to control the BreeceGo App from the group and/or installation level
here is how to find the configuration for BreeceGo
the Menu buttons to be used for BreeceGo
The Menu arrows are used to rearrange the Menu buttons in which order is preferred.
Configure the accessibility of the menu buttons, Yes, No or Super User only
Botton will be shown on the app
Botton will not be shown on the app
-Yes - Super user-only
botton will be shown but need a password before accessing (setting for the below see general settings)
In app - will look like this
yes, BreeceGo will control the display when used.
No, the BreeceGo app will accept even faulty displays. They can afterward be found in Breece Cloud
Product Input Features
Remove leading string
If there is a leading string, an example could be 5 digits which are in front of every order number in the barcode
the system can remove those when scanned by BreeceGo.
Just enter the string here to save.
Keyboard Layout ( Product input)
Here the default Keyboard layout can be selected between Numeric and Standard ( Alfa)
Convert Code 39 to 32
this setting ( Often called the farmaceutical conversion, because of its use in Italian pharmacies) is used to convert a barcode 39 into a 32.
Camera Barcode Scanning
Press to scan
Makes sure you don't scan anything unintentionally.
When enabled the camera will only scan for barcodes when the user presses the button.
Confirm Camera input
When enabled each scan must be confirmed by the user
In this sub-menu, it is possible to set the extra features on the device
Keeps scanner on all the time
Code duplicate filter:
Time in ms befor a rescan can be made - Please note that this setting will only apply while "Continuous scanning" is enabled.
Set on auto and not be edit
Enable or disable the device to use a beep sound
Enable or disable the device to use vibration
Barcode Symbology (Normally this is not changed):
In this sub-menu, it is possible to activate the barcode standards you wish to use on your system.
Barcode Symbology Properties:
Here the properties of some special Barcode handling can be made.
From Breece Cloud, it is possible to set up BreeceGo Notifications.
here is how to find it on the cloud
Here it is possible to enable or disable different notification types.
when enabled the different notifications will appear in the message part of the BreeceGo app.
They are marked with colors:
Red is an alert
Yellow is a warning
Green is OK
When an alarm is enabled it has to be configured:
Notify when lowered
When this is checked, it determines to send a notification when the alarm is no more, either because it is resolved or no longer active.
is the minimum time from an alarm that goes off until it reaches the BreeceGo app.