• Oversigt





Add / Delete displays using Breece mobile assist app


  • Use BMA app on Mobile or Handheld


            (If the BMA App lacks the add delete buttoms - Please Contact Support)


    


Add display to system with BMA

  1. Find the master antenna in the store. It is marked with an orange dot

  2. Place displays right under the main antenna. The master antenna are able to configre displays.
  3. Press the add buttom
  4. Scan the display you want to add to the system.



On the Breece Cloud Website use the Queue tab 

  1. Control Breece Cloud for emty Queue before the next step
  2. Those displays that has changed and whre you can read the actual date in the buttom of the display, are now ready to use.
  3. If you can see blank displays or displays without current date go to next step

 



Delete displays from system with BMA

  1. Find the failed or blank displays

  2. Choose Delete buttom in the BMA app
  3. Scan failed displays
  4. Control the Queue is emty after the deletion
  5. Next press the Add bottom
  6. Add the missing displays and control the displays afterwords


If a failed display fails again, repeat the add/Delte routine up untill 3 times. Is a display still faulty, It is recommended to change batteries and repeat the add/delete cycle. Does it not work the display is proberly faulty

 




Add/Delete via cloud.breecesystem.com

A USB handscanner will come in handy to scan displays directly to the webpage though it is possible to type the display serielnumber.




Add Displays via cloud



  1. Log on to the cloud installation.
  2. Press the tab displays
  3. In the lower left corner press
  4. Scan displays directly in to the great gray rectangel. Remember to press the gery area before starting the scan
  5. Or scan the displays to a txt file
  6. Press and browse your txt file
  8. When all display are scannes/uploadet, press Add Display 
  9. Remenber to control the queue on the tab
  10. Control for emty queue
  11. Those displays that has changed and whre you can read the actual date in the buttom of the display, are now ready to use.
  12. If you can see blank displays or displays without current date go to next step

 

 

Delete displays from system via cloud

  1. Scan failed displays directly in to the great gray rectangel. Remember to press the gery area before starting the scan
  2. Press Delete Displays 
  3. Control for emty queue


Delete displays from system via Cloud (By filtering)

Press on the number of failed displays


Now all failed displays are chosen - Press DisplayBatch


Tryk på "Use filter" og derefter "Delete display"



If displays still fails

  • Try to take out the batteries for 10 sec 
  • Remember to delete display before adding
  • Try to change batteries 
  • If the display continues to fail, the display is proberbly broken