Add displays via cloud.breecesystem.com
- Log on to the cloud installation.
- Press the tab displays
- In the lower-left corner press
- intoScan displays directly in to the great gray rectangle. Remember to press the gery area before starting the scan
- Or scan the displays to a text file
- Press
and browse your text file 
- When all displays are scannes/uploadet, press Add Display scanned
- Remember to control the queue on the tab
- Control for an empty queue
- Those displays that have changed and where you can read the actual date at the bottom of the display, are now ready to use.
- If you can see blank displays or displays without the current date go to next step
Delete displays from the system via the cloud
- intoxicant failed displays directly in to the great gray rectangle. Remember to press the grey area before starting the scan
- Press Delete Displays
- Control for an empty queue
Delete displays from the system via Cloud (By filtering)
Press on the number of failed displays
Now all failed displays are chosen - Press DisplayBatch
Tryk på "Use filter" og derefter "Delete display"
- Try removing the battery from the display for about 10 seconds and inserting it back in. Then try deleting and adding the display again.
- Remember to delete displays on the system before adding the display
- If the display still fails, the display must be broken and can be sent back to Delfi Technologies mbh. on disposal.