Antenna

Bounce antenna
Make sure the antenna is online and visibel in the Discovery tool C:\Program Files (x86)\ZBD Displays\Bounce\Tools\EthernetCommunicator\...
Mon, 6 Jun, 2016 at 8:48 AM
Dynamic Communicator
Discovery If the Dynamic Communicator is within the same network, it is possible to use the Discovery Tool to lookup the IP address of the device,...
Tue, 25 Oct, 2016 at 10:11 AM
Antenna offline
hvis en antenne er offline prøv at genstart antennen  prøv at pinge antennen hvis den efter stadig er offline efter en genstart af pc. se om den står...
Mon, 8 Oct, 2018 at 1:32 PM
Bounce communicator - LED
In normal operation this rectangular LED will be flashing green, either in a slow, one second-off pattern, or in a more rapid continuous pattern. The...
Fri, 16 Aug, 2019 at 9:31 AM
Jobs is stuck (BoP og Cloud)
Kontroller Display API loggen. Hvis der (næsten) kun er linjer med denne jobtype - genstart master antennen. 12-04-2019 00:00:17    JobID=3173800, J...
Tue, 6 Aug, 2019 at 10:02 AM
Replace master communicator / Dynamic Communicator
1. In the BreeceServer directory go to Tools\Breece Communicator Management. 2. Right click Breece.DisplayApi.Communicator....
Fri, 16 Aug, 2019 at 12:48 PM
Antenna firmware version
Breece Version Bounce Version Communicator Version 1.6.7.0 3.3.23 N/A 1.7.10.0 3.7.23 N/A 1.7.11.2 3.7.50 N/A 1.8.0.0 3.7.50 N/A 1.8.1.0 3.7.50 N/A 2.0.3.0 ...
Mon, 1 Oct, 2018 at 1:45 PM
Factory Reset Dynamic Communicator with firmware 1.12.0
When trying to factory reset the antenna and get the following output. ERROR: Command can only be executed if the communicator has no configured display...
Wed, 9 Aug, 2017 at 9:22 AM
Dynamic Communicator Reset button
To initiate a reset, you need to power down the communicator first. Press and hold the reset button and then power the communicator again. Continue to hold...
Wed, 24 Jan, 2018 at 9:46 AM