User guide for Positions
Position: Make it possible to give display a position on a map, giving the possibility for products to inherit the position when the product is assigned to the display.
Flash: Make it possible to flash display via display serial number or product.
Positions – what is needed?
To give the position to a displays on a map, the user needs to upload a map called Plan.
Click the “Positions” icon on the menu bar and click “Plans”. Here the user uploads a picture of the store overview giving it a plan name and a sorting number (sorting is used whenever a list of plans is shown).
Add sections to give more information about position (seen from above).
Via “Section overview” it is possible to add Sections (areas) to the different Plans. These sections are used to give even more information about the position on a display. Use the layers to easily administrate the sections.
Sections are added to a Plan and a layer. The layer is only used to easily visually administrate the section. It is possible to enable/disable layers (and therefore show/not show the sections on it).
To add a section - select the plan (and maybe select a layer – above Layer 0 is selected) and simply drag and drop a square on the overview. Give the section a name and an identifier (identifier is used for scan to position – where identifier could be a number from a scanned barcode). Make sure to mark the correct layer if this is used when adding section.
To delete a section – click on the section and click “Delete”.
To replace a section – click on the section and click “Replace”. Select the plan and the layer and drag and drop a square. Fill in name and identifier.
Add Attributes to give more information about position. This is very versatile and can be used differently. An example could be to implement depth to position – shelf number.
Via “Configuration” add Attributes via “New Attribute” at the bottom. Here it is possible to choose from 3 variables. Text – free text. List – a list of predetermined options. Boolean – yes/no. There are the same variables used in manual fields.
The Attributes are prompted when Position is set via Breece mobile Assist. Only the attribute values can be set here.
How to add a position to a display.
From cloud gui displays list, right-click on the display and select “Set position”. Select Plan and click on the plan. The display position is now registered.
How to show position on display.
From cloud gui displays list, right-click on the display and select “Show position”. If position is set then the displays position is shown including which sections the display is located in and the attribute values.
How to show position on product.
From the product list, right-click on the product and click “Show position”. The product can have multiple positions if the same product is assigned to several displays with different positions.
Click on the red position indicator to see details about the position and display.
How to flash a display.
From cloud gui displays list, right-click on the display and select “Flash”. This option is only shown if the antennas on the installation are updated to the right firmware 2.3.3 or above.
How to flash a display via product.
From cloud gui products list, right-click on the product and select “Flash”. This option is only shown if the antennas on the installation are updated to the right firmware 2.3.3 or above.
Of cause it is only possible to flash a product that is assigned to a display. When flashing via product – all the displays the product is assigned to will flash.
Scan to position – only possible via Breece Mobile Assist.
Setting attribute values – only possible via Breece Mobile Assist (prompted via “Set position”)