Point Mobile PM80

  1. Open "Tools"
  2. Click "ScanSettings"
    1. Click "Basic"
    2. Click "Terminator" 
      1. Select "LF"



MOTOROLA Configuration

  1. Open "Datawedge"
  2. Create a new profile by selecting the 3 dots in the top right corner
    1. Name "Breece Mobile Assist" 
    2. click OK
  3. Enter the new Breece Mobile Assist" Profile
  4. Enter Assiciated apps
    1. select the 3 dots in the top right corner and create new app/activity
      1. find the Breece Mobile Assist app
      2. select * 
      3. go back
  5. Enable ”Keystroke output”
    1. Set "Action Key character": Linefeed
  6. See under KEYSTROKE OUTPUT and select “advanced data formatting”
    1. Enable checked
    2. Select "Rule0"
      1. Check Rule enabled
      2. Enter the action menu by selecting the 3 dots in the top right corner
      3. Select "New Action"
      4. Select "Send char"
      5. enter Character code = 10


SYMBOL configuration

  1. Open "Datawedge"
  2. Enable ”Keystroke output”
  3. Set "Action Key character": Linefeed
  4. See under KEYSTROKE OUTPUT and select “advanced data formatting”
    1. Enable checked
    2. Select "Rule0"
      1. Check Rule enabled
      2. Enter the action menu by selecting the 3 dots in the top right corner
      3. Select "New Action"
      4. Select "Send char"
      5. enter Character code = 10