1. In the BreeceServer directory go to Tools\Breece Communicator Management.


2. Right click Breece.DisplayApi.Communicator.Management.exe and select "Run as Administrator"


3. In the "Replace Master Communicator" Section insert the serial number of the old Master Communicator.


4. Select the Backup selection.



Take Backup Now

Use this selection when you want to change a Master Communicator and you have access to the old Antenna.


Use stored Backup

Use this selection if you dont have access to the old antenna but have access to a backud of the system.


No Backup

Only available when displays hasn’t been added to the system yet.


It's Important to run this program as Administrator


The new antenna needs to be upgraded from a RangeExtender to a Dymanic Communicator before starting the restore.











 


Take Backup Now


Before you start, make sure you can see the original Communicator in the DisplaydataDiscovery tool.


5.Choose the Backup Path where the backup will be placed.

6. Insert the serialnumber of the new master communicator in the "New Master Communicator" field

7. Press Replace


Proccessing: Getting Backup/Restoring Master Communicators. Getting new api license for the new communicator on the license server. When the license has been changed the this message will be shown. 

8. Change the original Master communicator with the new.

9. When the new Master Communicator has finished booting press "Continue".


 Make sure you can see the new Communicator in the DisplaydataDiscovery tool.

 


10. Restart breece core

11. Start Breece Explorer and make sure that the replacement was successful.

 





Use stored Backup

 Note: The backup path should point to the "DisplayApi backup". This will typically be named DisplayApiBackup_[TIME].bak You will find this backup with the full backup of Breece. 

5.Choose the Backup PathIn the "Backup Path"

6. Select your backup

7. Insert the serialmunber of the new master communicator in the "New Master Communicator" field

8. Press Replace



 Proccessing: Restoring the new Master Communicator. Getting new api license for the new communicator on the license server. When the license has been changed the this message will be shown.


9. When the new Master Communicator has finished booting press "Continue".




10. Restart breece core

11. Start Breece Explorer and make sure that the replacement was successful.


 




No Backup


Note: This will only change the serienumber It will not backup/restore. 


5. Insert the serialmunber of the new master communicator in the "New Master Communicator" field

6. Press Replace



 Proccessing: Getting new api license for the new communicator on the license server. When the license has been changed the this message will be shown.


7. When the new Master Communicator has finished booting press "Continue".




8. Restart breece core

9. Start Breece Explorer and make sure that the replacement was successful.